Our suite were given new carpet this weekend, and as i was shifting the machines out of the manner i pulled aside the serial adapter. The rj-45 clip held rapid, and the metal body became screwed tight to the machine - so the metallic frame pulled out of the plastic shell, and all the sockets pulled off of the indoors pins. It pulled away at a slight perspective, so i can tell that pins 1, 2, three, 4, 7, and 20 have been connected - they're bent only a little. I'm now not positive about your server, but i've used a ordinary "cisco" db9->rj45 cable with sun netra 240, and it labored fine. Perhaps if you examine it to this, and see if the pins fit? (1 and eight aren't linked, see if yours suit, and take into account about the db9->db25 conversion).
I attempted to transpose the pinouts i found on the solar web page, and the cisco pinouts on the page that @mulaz endorsed, and i could not locate any way to reconcile them with the formerly-bent pins. Fortuitously, but, i used to be capable of reach the enterprise that established the sunblade (and the piece of equipment that it's controlling, which is probably greater to the point!) The tech determined a spare adapter of the equal version, took it apart, and read me the pinout over the cellphone. I am posting it here in case a person else has the equal difficulty.